大香蕉伊在线视频

Welcome to Weifang Fushun Energy Saving Technology Co., Ltd.
Professional Wood drying equipment and Wood drying equipment etc. Set scientific research and development, production, installation, debugging services in one
 contact us

Preheat treatment of wood drying equipment

Number of hits:    Update time: 20 / 09 / 14 15:54:09       Source: 13428888166.cn 大香蕉伊在线视频: close branch      Enjoy:
When the equipment is used in the work, it will be preheated first. What are the steps of preheating in the wood drying equipment? Then, let's introduce the preheating treatment of wood drying equipment
Preheat treatment time should be determined according to the type, thickness and moisture content of wood. For example, materials with a thickness of 5 mm should be sprayed for 12-15 hours first. In order to obtain a reasonable temperature gradient, the cooked materials need to be treated for 6-8 hours. They are Cyclobalanopsis glauca and Quercus australis, which have higher density (such as parenchyma cells and ray parenchyma cells). Mahogany, Patty and Badou are sprayed for 24 hours to soften the wood, smooth the cell cavity, and partially dissolve the filling material in the cell cavity Wood drying equipment Prepare for drying.
The initial injection temperature should not be too low, otherwise the steam will flow in Wood drying equipment If the furnace is too small, the relative humidity in the furnace can not meet the standard requirements, and the preheating treatment effect is not good. Generally, the initial treatment temperature is 95-10oc. Whether the fan starts continuously in the initial treatment depends on the tightness of the furnace body. If the furnace body is well sealed, the initial spraying can be started continuously for 3-4 hours; If the sealing performance of the furnace body is poor and the furnace body is started continuously for a long time, the temperature in the furnace will increase and the humidity will decrease, which will lead to drying defects during the initial treatment. In this case. Generally, it is opened every 2 ~ 3 hours. The steam is evenly dispersed on the surface of the material. Good treatment effect can be obtained.

The above is the preheating treatment of wood drying equipment. I hope you can understand.

 Wood drying equipment

contact us contact us