大香蕉伊在线视频

Welcome to Weifang Fushun Energy Saving Technology Co., Ltd.
Professional Wood drying equipment and Wood drying equipment etc. Set scientific research and development, production, installation, debugging services in one
 contact us

How to remove moisture from wood drying equipment

Number of hits:    Update time: 20 / 11 / 02 16:32:11       Source: 13428888166.cn 大香蕉伊在线视频: close branch      Enjoy:

The wood drying equipment is equipped with a spray device to make the wood achieve the effect of hot steaming. The moisture of the wood is discharged from the inside to the outside in stages. After drying, the wood will not deform, crack inside or end. Below for you to share the next wood drying equipment is how to discharge moisture.

 Wood drying equipment

1. Moisture heat drying wood, because the wood drying equipment steam contains a lot of moisture, the wood absorbs the heat and moisture in the steam at the same time. If the wood surface is wet, the surface will not dry, so no surface cracking will occur. Similarly, when the resin in the wood is heated and the moisture content is 0.10-10.438, the resin in the wood will be softened, so as to achieve the effect of water permeability of the wood. The moisture in the wood can enter and exit freely, so there will be no internal cracking of the wood. It can be seen that the steam not only keeps the flexibility of wood fiber, but also protects the wood well.
2. Due to the effect of damp heat, the wood fiber will not shrink sharply or embrittlement, and the fiber has good extensibility and high flexibility. As a result, the distortion of the wood is greatly reduced.
3. Because the hot and humid drying is carried out in the sealed space of wood drying equipment, the general steaming temperature is 90-115 ℃. In the cooking process of wood fiber at this temperature, the wood fiber can not only maintain its flexibility, but also be cured. Therefore, the wood after fiber curing can greatly improve the stability of wood and maintain its natural luster.
4. Wood wet heat drying is based on the principle of saturated steam driven by unsaturated steam, which is simply (steam overload drying method). Because of the high temperature, fast speed and high efficiency, it can be discharged in 5-10 days.
The above content is the wood drying equipment how to ebb, hope to help you.
contact us contact us