大香蕉伊在线视频

Welcome to Weifang Fushun Energy Saving Technology Co., Ltd.
Professional Wood drying equipment and Wood drying equipment etc. Set scientific research and development, production, installation, debugging services in one
 contact us

Three functions of forced drying of wood drying equipment

Number of hits:    Update time: 20 / 10 / 16 16:26:10       Source: 13428888166.cn 大香蕉伊在线视频: close branch      Enjoy:
Fresh wood contains a large amount of water, which will evaporate under certain conditions. The natural evaporation of water will cause drying shrinkage, cracking, bending deformation, mildew and other defects. Seriously affect the quality of wood products. Therefore, it is necessary to force (control) drying of wood before making various wood products. Proper drying equipment can overcome the above defects, improve the mechanical strength and processing performance of wood. It is not only an important technical measure to make rational use of wood and increase its value, but also an indispensable primary process in the production of wood products.
1. Wood drying equipment oven?
Wood drying equipment to achieve forced wood drying, need to have three basic functions: heating, moisture control, ventilation. The heating effect is self-evident; Humidity control (spraying steam or mist water) is used to ensure the high humidity environment required in some drying stages and prevent wood cracking and deformation; Ventilation equipment needs to ensure that hot and humid air passes through all parts of the pile evenly, so that the moisture content of the dried wood is even. The simple wood "oven" is usually heated directly or indirectly by hot oven gas, which is difficult to organize reasonable air circulation and adjust humidity. It is difficult to obtain good drying effect with this simple equipment.
Is automatic control of wood drying equipment necessary?
Wood drying is a long process. In the whole process, the wood drying equipment needs to constantly adjust the environmental parameters in the drying kiln according to the change of wood moisture content, so as to ensure that the wood can be well dried. The manual control of this process not only requires the operator to have more understanding of wood drying technology, but also requires the operator to have a strong sense of responsibility and maintain a good mental state for a long time. Lack of experience or inattention can lead to great loss of wood drying. The automatic control system is like an experienced and energetic waiter, faithfully carry out every task in the drying process until the drying is completed. For manufacturers with less experience, especially those with higher drying quality requirements, it is particularly important to configure automatic control system.
Fresh wood contains a large amount of water, which will evaporate under certain conditions. The natural evaporation of water will cause drying shrinkage, cracking, bending deformation, mildew and other defects. Seriously affect the quality of wood products. Therefore, it is necessary to force (control) drying of wood before making various wood products. At this time, it is necessary to select the appropriate wood drying equipment.
contact us contact us